Pima Captain 8 Installation Guide

Captain 8
35
No.
Terminal
Description/connected peripheral
11
SERIAL
RS-232 terminal is used for connecting the VVR and net4pro
12
TRANSMITTER
GSM-200 cellular communicator, TRV/TRU-100 radio
transmitters and SMS-100 module.
 The GSM-200 and the SMS-100 cannot be
installed together!
 To connect a radio transmitter together with the
GSM-200, use a special cable (P/N 3411058).
13
Backup battery
cables
The battery is a rechargeable lead-acid battery. The contacts
are Red: (+), Black: (-).
Make sure you connect the battery wires by
their proper polarity!
14
AC
13.8v transformer input
15
JP3 jumper
Set the jumper with reference to the EOL loops see page 37.
Fuses
Fuse
Protects the...
F1
Siren power supply (0.9A)
F2
Keypads and detectors power supply (750mA)
F3
Battery
2.3. Zones and Peripherlas
 The overall length of the wirings connected to the BUS cannot exceed 500
meters. If a longer distance is required, see section 1.5.9, on page 16).
 The BUS uses PIMA proprietary protocol.
Before you begin the installation process, make sure the control panel is
not connected to battery or AC power.

Pima Captain 8 Specifications

General

Brand	Pima
Model	Captain 8
Category	Security System
Language	English