Pima Captain 8 Installation Guide

Programming
43
3.3. The User menu
To access the User menu, press ‘0’ for 2 seconds (wait for confirmation tone) and enter the
Master code or a User code
1
. The Master code is a super user code with access to all the user's
menus, including the Master code's changing menu.
The User code is given per user, mainly for arming and disarming access to the various user
menus are set separately per user.
3.3.1. The options when entering a user code
Entering a user code can lead to one of two: the panel is immediately armed or disarmed (toggle
mode), or the user menu is displayed: a global parameter in the “General Parameters” menu “M:
User code->User menu” (see section 8.1, on page 62) sets these two options to all the users.
 A user can control several partitions using its code.
 A user (code) cannot be used for changing the Master code.
3.4. The Installer menu
To enter the Installer menu, enter the Installer code (default 1234):
The Installer menu is made of 12 sub-menus. To enter a menu, press its associated key, as listed
in the next table:
Key
Menu
Page
[1]
System installation
45
[2]
Zones
47
[3]
Communication
50
[4]
Timers
60
[5]
General parameters
62
[6]
System responses
63
[7]
Outputs configurations
65
[8]
Full programming, Local and Fast download
69
[9]
Installer code change
69
[*]
Express programming
69
[0]
Tests
71
3.4.1. The navigation keys
 [NEXT]/[BACK]: Forward/Backward between screens/options/parameters
 [ENTR]: Enter/select/confirm
 [END]: End/Exit: return to the previous/main screen without saving
 [#]: Reset/Erase/Set the current parameter to '-'/'+' (toggle mode)
1
See the next section for different ways to access the user menu.
Installer
code
Installer Menu
Choose 1,2..


Pima Captain 8 Specifications

General

Brand	Pima
Model	Captain 8
Category	Security System
Language	English