Hunter-Pro Series Captain 8 - Installation Guide
70
12 Asterisk Key: Fast Programming
Enter the Installer password and press [*], to enter the “Fast Programming” menu.
Following is the Fast Programming screens:
Set the time in hh:mm format
Set the date in dd:mm:yy format
Set up to 4 private (end user) telephone numbers.
Press the asterisk key for ‘+’, ‘*’, ‘#’ and ‘P’ (one second pause).
Set Entry 1 & 2 and the Exit delays
Set the local ('X') and wireless ('W') expanders
Set the number of remote expanders
Set account 1 numbers for the phone and radio reports
Set CMS 1 protocol and radio station ('T')
Set up to 4 telephone numbers of the CMS #1.
Press the asterisk key for ‘+’, ‘*’, ‘#’ and ‘P’ (one second pause).
Set CMS 1 test time (PSTN & radio) and test interval
Set CMS 1 radio test interval
Enter a new Installer code (4-6 digits). You must enter a code or
cancel this step by pressing [END].
3
ENTR ENTR
Timers, Counters
ENTER/NEXT/END
Entry/Exit Delay
ENTER/NEXT/END
Entry 1 2 Exit
20 20 60
ENTR
1
Expanders
ENTER/NEXT/END
ENTRNEXT
Sys Installation
ENTER/NEXT/END
XMW
---
ENTR
Remote Expanders
0
ENTR
1
Expanders
ENTER/NEXT/END
ENTRNEXT
Sys Installation
ENTER/NEXT/END
XMW
---
ENTR
Remote Expanders
0
3
ENTR ENTR
Communication
ENTER/NEXT/END
Account No.
ENTER/NEXT/END
NEXT
Acouont.No 1
Ph:0000 Rd:0000
Acouont.No 16
Ph:0000 Rd:0000
RadioTelephone
ENTR NEXT
ENTR ENTR
Communication
ENTER/NEXT/END
Phone Numbers
ENTER/NEXT/END
MS Phone 1<Del=#
MS Phone 4<Del=#
X23
….
ENTR NEXT
ENTR ENTR
Communication
ENTER/NEXT/END
Phone Numbers
ENTER/NEXT/END
MS Phone 1<Del=#
MS Phone 4<Del=#
X23
….
AA12PFDMOLTWIR
+++++++++++-++1
Test Time:00:00
Interval:24 Hrs
Radio Tst. Inter
Hrs:24 Min.s:0
Installer Code
****** (4-6)
To Next Page
Loading...
Need help?
General
