7 – Zoning Configuration
Managing Zone Sets
59263-02 A 7-15
A
Managing Zone Sets
Managing zone sets consists of the following tasks:
îš„ Create a Zone Set
îš„ Delete a Zone Set
îš„ Rename a Zone Set
îš„ Copy a Zone Set
îš„ Add Zones to a Zone Set
îš„ Remove Zones from a Zone Set
îš„ Activate a Zone Set
îš„ Deactivate a Zone Set
All of these tasks except Activate a Zone Set and Deactivate a Zone Set require
an Admin session and a Zoning Edit session.
Create a Zone Set
Enter the Zoneset Create command to create a new zone set as shown in the
following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset create zoneset_1
SANbox (admin-zoning) #>zoning save
Delete a Zone Set
Enter the Zoneset Delete command to delete a zone set as shown in the following
example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset delete zoneset_1
SANbox (admin-zoning) #>zoning save
To Next Page
Loading...
Need help?
General
