59263-02 A 13-1
13 Simple Network
Management Protocol
Configuration
This section describes the following tasks:
îš„ Managing the SNMP Service
îš„ Displaying SNMP Information
îš„ Modifying the SNMP Configuration
îš„ Resetting the SNMP Configuration
îš„ Managing the SNMP Version 3 Configuration
The Simple Network Management Protocol (SNMP) provides for the management
of the switch through third-party applications that use SNMP. Security consists of
a read community string and a write community string that serve as passwords
that control read and write access to the switch. These strings are set at the
factory to well-known defaults and should be changed if SNMP is to be enabled.
The switch supports SNMP version 3 in the CLI, which is disabled by default.
To Next Page
Loading...
Need help?
General
