5 – Switch Configuration
Testing a Switch
59263-02 A 5-27
A
Online Tests for Switches
An online test is a non-disruptive test that exercises port-to-device connections for
all ports that are online. The following is an example of an online test:
SANbox #> admin start
SANbox (admin) #> test switch online
A list of attributes with formatting and current values will follow. Enter a new
value or simply press the ENTER key to accept the default value. If you wish to
terminate this process before reaching the end of the list press 'q' or 'Q' and the
ENTER key to do so.
LoopCount (decimal value, 1-4294967295) [100 ]
FrameSize (decimal value, 40-2148) [256 ]
DataPattern (32-bit hex value or 'Default') [Default]
StopOnError (True / False) [True ]
LoopForever (True / False) [False ]
Do you want to start the test? (y/n) [n] y
To Next Page
Loading...
Need help?
General
