12 – Call Home Configuration
Testing a Call Home Profile
59263-02 A 12-15
A
Deleting a Data Capture Configuration
Enter the Capture Remove command to delete a data capture configuration from
the Tech_Support_Center profile as shown in the following example:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> capture remove
Capture Entries for Profile: Tech_Support_Center
Index TimeOfDay DayOfWeek Interval
----- --------- --------- --------
1 02:00 Sat 1 (weeks)
Please select a capture entry from the list above ('q' to quit): 1
The selected capture entry has been removed from profile Tech_Support_Center.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
Testing a Call Home Profile
Enter the Callhome Test Profile command to test a Call Home profile as shown in
the following example. This command generates a test message and routes it to
the email recipients specified in the profile.
SANbox #> admin start
SANbox (admin) #> callhome test profile group4
A callhome profile test has been started.
A notification with the test result will appear
on the screen when the test has completed.
SANbox (admin) #>
Test for Callhome Profile group4 Passed.
To Next Page
Loading...
Need help?
General
