7 – Zoning Configuration
Managing Zones
59263-02 A 7-17
A
Deactivate a Zone Set
Enter the Zoneset Deactivate command to deactivate the active zone set and
disable zoning in the fabric:
SANbox #> admin start
SANbox (admin) #> zoneset deactivate
Managing Zones
Managing Zones consists of the following tasks:
îš„ Create a Zone
îš„ Delete a Zone
îš„ Rename a Zone
îš„ Copy a Zone
îš„ Add Members to a Zone
îš„ Remove Members from a Zone
All of these tasks require an Admin session and a Zoning Edit session.
Create a Zone
Enter the Zone Create command to create a new zone as shown in the following
example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone create zone_1
SANbox (admin-zoning) #> zoning save
Delete a Zone
Enter the Zone Delete command to delete zone_1 from the zoning database as
shown in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone delete zone_1
SANbox (admin-zoning) #> zoning save
To Next Page
Loading...
Need help?
General
