4 – Network Configuration
Managing IP Security
4-14 59263-02 A
S
Renaming a User-Defined Policy
To rename a policy (policy_1), enter the Ipsec Policy Rename command as shown
in the following example:
SANbox #> admin start
SANbox (admin) #> ipsec edit
SANbox (admin-ipsec) #> ipsec policy rename policy_1 policy_4
The security policy will be renamed. Please confirm (y/n): [n] y
SANbox (admin-ipsec) #> ipsec save
The IPsec configuration will be saved and activated.
Please confirm (y/n): [n] y
Copying a Policy
You can copy both user-defined and dynamic policies. To copy a policy (policy_1),
enter the Ipsec Policy Copy command as shown in the following example:
SANbox #> admin start
SANbox (admin) #> ipsec edit
SANbox (admin-ipsec) #> ipsec policy copy policy_1 policy_a
SANbox (admin-ipsec) #> ipsec save
The IPsec configuration will be saved and activated.
Please confirm (y/n): [n] y
Managing the Security Association Database
The security association database is made up of user-defined associations and
dynamic associations (associations created by the switch). In addition to creating
an association, you can delete, modify, rename, and copy user-defined
associations. Dynamic associations can only be copied.
îš„ Creating an Association
îš„ Deleting an Association
îš„ Modifying a User-Defined Association
îš„ Renaming a User-Defined Association
îš„ Copying an Association
To Next Page
Loading...
Need help?
General
