Qlogic SANbox 5800V Series Interface Guide

14 – Command Reference
Command Listing
59263-02 A 14-187
A
Show Topology
Displays information about devices connected to the switch.
Authority None
Syntax show topology [port_number]
Keywords [port_number]
Displays the devices connected to the port given by [port_number].
Examples The following is an example of the Show Topology command:
SANbox #> show topology
Unique ID Key
-------------
A = ALPA, D = Domain ID, P = Port ID
Port Local Local Remote Remote Unique
Number Type PortWWN Type NodeWWN ID
------ ----- ------- ------ ------- ------
5 F 20:05:00:c0:dd:00:bd:ec N 20:00:00:00:c9:22:1e:93 010500 P
10 E 20:0a:00:c0:dd:00:bd:ec E 10:00:00:c0:dd:00:80:21 4(0x4) D
The following is an example of the Show Topology command for port 1:
SANbox #> show topology 1
Local Link Information
----------------------
PortNumber 1
PortID 650100
PortWWN 20:01:00:c0:dd:00:91:11
PortType F
Remote Link Information
-----------------------
Device 0
NodeWWN 50:80:02:00:00:06:d5:38
PortType NL
Description (NULL)
IPv4Address 0.0.0.0
IPv6Address fc00:1234:5678:9abc:def0:1234:5678:9abc
Device 1
NodeWWN 20:00:00:20:37:2b:08:c9
PortType NL
Description (NULL)
IPv4Address 0.0.0.0
IPv6Address fc00:1234:5678:9abc:def0:1234:5678:9efg

Qlogic SANbox 5800V Series Specifications

General

Brand	Qlogic
Model	SANbox 5800V Series
Category	Switch
Language	English