5 – Switch Configuration
Displaying Switch Information
5-6 59263-02 A
S
Configuration Information
The Show Config command displays a variety of configuration information at the
port and switch levels. In addition to the basic switch configurations, the Show
Config command displays parameters that control how data is maintained in the
security and zoning databases. The Show Config command displays the following
types of information:
Switch Configuration Parameters
Zoning Configuration Parameters
Security Configuration Parameters
Refer to “Displaying Port Information” on page 6-1 for information about displaying
port configuration information.
Switch Configuration Parameters
Enter the Show Config Switch command to display the switch configuration
parameters. These parameters determine the operational characteristics of the
switch. Refer to Table 14-22 for a description these parameters.
SANbox #> show config switch
Configuration Name: default
-------------------
Switch Configuration Information
--------------------------------
AdminState Online
BroadcastEnabled False
InbandEnabled True
FDMIEnabled False
FDMIEntries 10
DefaultDomainID 19 (0x13)
DomainIDLock True
SymbolicName sw108
R_A_TOV 10000
E_D_TOV 2000
PrincipalPriority 254
ConfigDescription Default Config
ConfigLastSavedBy admin@OB-session5
ConfigLastSavedOn day month date time year
InteropMode Standard
To Next Page
Loading...
Need help?
General
