Qlogic SANbox 5800V Series Interface Guide

14 – Command Reference
Command Listing
14-140 59263-02 A
S
Show Config Security
Displays the security database configuration parameters.
Authority None
Syntax show config security
Examples The following is an example of the Show Config Security command:
SANbox #> show config security
Configuration Name: default
-------------------
Switch Security Configuration Information
-----------------------------------------
FabricBindingEnabled False
AutoSave True
Port Binding Status WWN
---- -------------- ---
0 True 10:20:30:40:50:60:70:80
1 True 10:20:30:40:50:60:70:80
2 False No port binding entries found.
3 True 10:20:30:40:50:60:70:80
4 True 10:20:30:40:50:60:70:80
5 False No port binding entries found.
6 True 10:20:30:40:50:60:70:81
7 False No port binding entries found.
8 True 10:20:30:40:50:60:70:80
9 False No port binding entries found.
10 False No port binding entries found.
11 False No port binding entries found.
12 False No port binding entries found.
13 False No port binding entries found.
14 False No port binding entries found.
15 False No port binding entries found.
16 False No port binding entries found.
17 False No port binding entries found.
18 False No port binding entries found.
19 False No port binding entries found.
20 False No port binding entries found.
21 False No port binding entries found.
22 False No port binding entries found.
23 False No port binding entries found.

Qlogic SANbox 5800V Series Specifications

General

Brand	Qlogic
Model	SANbox 5800V Series
Category	Switch
Language	English