Qlogic SANbox 5800V Series Interface Guide

14 – Command Reference
Command Listing
14-192 59263-02 A
S
Snmpv3user
Manages SNMP version 3 user accounts on the switch.
Authority Admin session except for the List keyword
Syntax snmpv3user
add
delete [account]
edit
list
Keywords add
Creates an SNMP version 3 user account, prompting you for the parameters that
are described in Table 14-43.
delete [account]
Deletes the SNMP version 3 user account given by [account].
edit
Modifies an SNMP version 3 user account, prompting you first for the account
name to edit. For a description of the SNMP version 3 user account parameters,
refer to Table 14-43.
Table 14-43. SNMP Version 3 User Account Parameters
Parameter Description
Username Account user name
Group Group type: Read-Only or Read-Write. The default is
Read-Only.
Authentication Enables (True) or disables (False) authentication. The
default is False.
AuthType Authentication type can be MD5 or SHA.
AuthPhrase Authentication phrase
Confirm AuthPhrase Authentication phrase confirmation. Re-enter the phrase.
Privacy Enables (True) or disables (False) privacy. The default is
False.
PrivType Privacy type. The default is DES.
PrivPhrase Privacy phrase
Confirm PrivPhrase Privacy phrase confirmation. Re-enter the phrase.

Qlogic SANbox 5800V Series Specifications

General

Brand	Qlogic
Model	SANbox 5800V Series
Category	Switch
Language	English