12 – Call Home Configuration
Managing the Call Home Database
59263-02 A 12-9
A
Creating a Profile
Enter the Profile Create command to create a Call Home profile as shown in the
following example:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> profile create profile_1
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press ’q’ or ’Q’ and the ENTER key to do so.
Default Values:
Level Alarm
Format FullText
MaxSize 100000
EmailSubject <undefined>
RecipientEmail (up to 10 entries allowed)
New Value (press ENTER to accept default value, 'q' to quit):
Level (Alarm,Critical,Warn,None) :
Format (1=FullText, 2=ShortText, 3=Tsc1) :
MaxSize (decimal value, 650-100000) :
EmailSubject (string, max=64 chars, N=None) : Technical problem
RecipientEmail (ex: admin@company.com, N=None)
1. <undefined> : admin0@company.com
The profile has been created.
This configuration must be saved with the callhome save command
before it can take effect, or to discard this configuration
use the callhome cancel command.
SANbox (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
To Next Page
Loading...
Need help?
General
