Qlogic SANbox 5800V Series Interface Guide

14 – Command Reference
Command Listing
59263-02 A 14-85
A
Set Beacon
Enables or disables the flashing of the Logged-In LEDs for the purpose of locating
a switch.
Authority None
Syntax set beacon [state]
Keywords [state]
[state] can be one of the following:
on
Enables the flashing beacon.
off
Disables the flashing beacon.
Examples The following is an example of the Set Beacon command:
SANbox #> set beacon on

Qlogic SANbox 5800V Series Specifications

General

Brand	Qlogic
Model	SANbox 5800V Series
Category	Switch
Language	English