Qlogic SANbox 5800V Series Interface Guide

14 – Command Reference
Command Listing
59263-02 A 14-143
A
Show Config Threshold
Displays alarm threshold parameters for the switch.
Authority None
Syntax show config threshold
Examples The following is an example of the Show Config Threshold command:
SANbox #> show config threshold
Configuration Name: default
------------
Threshold Configuration Information
-----------------------------------
ThresholdMonitoringEnabled False
CRCErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 1
SampleWindow 10
DecodeErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 0
SampleWindow 10
ISLMonitoringEnabled True
RisingTrigger 2
FallingTrigger 0
SampleWindow 10
LoginMonitoringEnabled True
RisingTrigger 5
FallingTrigger 1
SampleWindow 10
LogoutMonitoringEnabled True
RisingTrigger 5
FallingTrigger 1
SampleWindow 10
LOSMonitoringEnabled True
RisingTrigger 100
FallingTrigger 5
SampleWindow 10

Qlogic SANbox 5800V Series Specifications

General

Brand	Qlogic
Model	SANbox 5800V Series
Category	Switch
Language	English