Quantum Scalar i80 User Manual

Chapter 5: Advanced Reporting
Automatically E-mailing Advanced Reporting Reports and Logs
134 Quantum Scalar i40 and Scalar i80 User’s Guide
9 Save the library configuration. For instructions on how to save the
library configuration, see
Saving the Library Configuration on
page 107.
Modifying a Recipient Web Client
1 Select Setup > Notifications > Advanced Reporting > Receiver
Addresses
.
The Setup - Advanced Reporting Receiver Addresses screen displays.
2 Click Modify.
3 Change any of the settings and click Apply.
4 On the Success window, click Close.
5 Save the library configuration. For instructions on how to save the
library configuration, see
Saving the Library Configuration on
page 107.
Deleting a Recipient Web Client
1 Select Setup > Notifications > Advanced Reporting > Receiver
Addresses
.
The Setup - Advanced Reporting Receiver Addresses screen displays.
2 Select a recipient and click Delete.
3 On the Confirmation window, click OK.
Save the library configuration. For instructions on how to save the
library configuration, see
Saving the Library Configuration on
page 107.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g