Quantum Scalar i80 User Manual

Chapter 7: Encryption Key Management
EKM Path Diagnostics
184 Quantum Scalar i40 and Scalar i80 User’s Guide
Enabling Automatic
EKM Path Diagnostics
You can enable the library to automatically perform EKM Path
Diagnostics at selected intervals. During each interval, the library tests
every configured key server. The default test interval is 10 minutes. The
library generates a diagnostic ticket if there are problems.
Automatic EKM Path Diagnostics is enabled by default and should
al
ways be left enabled. You should not need to disable it unless
Quantum Support directs you to do so.
For a list of tests performed, see
EKM Path Diagnostics on page 182.
To enable Automatic EKM Path Diagnostics:
1 F
rom the Web client, select Setup > Encryption > System
Configuration (see Figure
33).
2 Selec
t the Automatic EKM Path Diagnostics check box.
3 Select
a test interval from the Interval drop-down list.
Figure 33 Enabling Automatic
EKM Path Diagnostics

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g