Quantum Scalar i80 User Manual

Chapter 11: Troubleshooting
Interpreting LEDs
Quantum Scalar i40 and Scalar i80 User’s Guide 323
Tape Drive/Sled LEDs The library supports SAS and Fibre Channel tape drives. The drive sled
LEDs for each are described below.
SAS
SAS Tape Drive Sleds have one LED that indicates the following:
Color Indicates
Green Healthy and operational.
Amber Tape drive is offline.
Red Failure. Replacement required.
Fibre Channel
Fibre Channel tape drive sleds have two LEDs on their rear panel,
indicated on the drive sled as STATUS and LINK (see Figure
79).
LED Color Indicates
Status Green Healthy and operational.
Amber Tape drive is offline.
Red Failure. Replacement required.
Link Green On solid — Fibre Channel link is
presen
t
Flashing — Fibre Channel link is
presen
t and communications are in
process
Off No Fibre Channel link is currently
presen
t.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g