Chapter 4: Configuring the Library
Setting the Date, Time, and Time Zone
50 Quantum Scalar i40 and Scalar i80 User’s Guide
Details on NTP settings include:
• At least one NTP server must be configured and available.
• NTP is enabled on the Date &
Time screen. When NTP is enabled,
you cannot manually configure date and time. For more information
on setting date and time manually, see
Setting the Date and Time
Manually on page 49.
• You can enter an IP address (or host name, if DNS is configured) for
th
e NTP servers.
• NTP server IP addresses must be ente
red in the proper format. See
Configuring Network Settings on page 40 for the proper format of
IPv4 and IPv6 addresses.
• After you apply NTP settings, system clock synchronization may take
several minutes.
You can only enable and configure NTP on the Web client.
Web Client
1 Select Setup > Date & Time.
2 Re
fer to the library Web client online help for detailed instructions.
To view the help, click the Help icon in the upper right corner of the
screen.
Setting the Time Zone To select your time zone from a list, disable Use Custom Time Zone
setting and select your time zone from the list.
If your time zone does not appear on the list, or if you want more
control
over your time settings, enable Use Custom Time Zone and set
a Universal Coordinated Time (UTC) offset.
You can only set the time zone via the Web client.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
