Quantum Scalar i80 User Manual

Quantum Scalar i40 and Scalar i80 User’s Guide 299
Chapter 10
Updating Firmware
This chapter covers updating library and tape drive firmware, including:
• Updating Library Firmware
• Updating and Autoleveling Tape Drive Firmware
• About Tape Drive Firmware Autoleveling
• Uploading Tape Drive Firmware Used in Autoleveling
• Deleting Tape Drive Firmware Used in Autoleveling
• Initiating Tape Drive Firmware Autoleveling
Updating Library Firmware
The library firmware update operation allows you to update library
firmware using the Web client. With the library firmware update
operation, you can upgrade firmware to a later version or downgrade
firmware to an earlier version. Upgrading library firmware can take up
to 30 minutes.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g