Quantum Scalar i80 User Manual

Chapter 9: Installing, Removing, and Replacing Components
Taking ESD Precautions
226 Quantum Scalar i40 and Scalar i80 User’s Guide
• Removing and Replacing a Magazine
• Removing and Installing a Power Supply
• Removing and Replacing the System Control Board
• Removing and Replacing a Tape Drive
• Packaging the Library for Moving or Shipping
• Replacing the Y-tray with Robot
Taking ESD Precautions
Some components within the Scalar i40 and Scalar i80 libraries contain
static-sensitive parts. To avoid damaging these parts while performing
installation procedures, always observe the following precautions:
• Use an antistatic wrist strap. If you do not have one, touch the
ou
tside of the library on the sheet metal before touching any
components to discharge static from your body.
• Keep static-sensitive parts in their original shipping containers until
ready for installation. Look
for the ESD sticker to identify static
sensitive parts.
• Avoid touching connectors and other components.
Note: Dry climates and cold-weather heating environments have
lower relative humidity and are more likely to produce static
electricity.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g