Quantum Scalar i80 User Manual

Chapter 11: Troubleshooting
Interpreting LEDs
324 Quantum Scalar i40 and Scalar i80 User’s Guide
Figure 79 Fibre Channel Tape
Drive LEDs
Half-height
FC tape
drive
Full-height
FC tape
drive
Link LED
Link LED
Status LED
Status LED
Power Supply LED Diagnostic tickets typically report all problems related to power
supplies. You can also observe the power supply LED to see if the power
supply is functioning appropriately (see Figure
80). The power supply
LED indicates the following:
LED Color Indicates
Green AC power is present and the library front panel
power switch
is turned ON.
Amber AC power is present but the library front panel
switch is turned OF
F.
Red Power supply failure.
Off No power. Ensure the power supply is correctly
plugged into a
wall outlet.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g