Settings You Can Change with the User Tools
119
4
1. General Features
4
/
4
11. Duplex Priority You can select the type of the Duplex function to be effec-
tive when the machine is turned on, Energy Saver mode is
off, or Copy Reset Timer is on.
Note
❒
Default:
Off
12. Cover/OHP Tray You can select a special tray for cover and OHP.
Note
❒
Default:
Bypass
Menu Description
13. Copy Reset Timer The machine returns to its initial condition automatically
after your job is finished. The time can be set from 10 to 999
seconds, or Off.
Note
❒
Default:
60 sec.
14. Initial Mode Set You can select the initial mode or Program No. 10 as the
mode to be effective when modes are cleared.
Note
❒
Default:
Standard
15. Bypass Mode Clear Specify whether to clear the bypass tray settings when the
machine is turned on, Energy Saver mode is off, or the
Copy Reset Timer times out.
Note
❒
Default:
Off
16. Key Op. Tools
If the machine is set to use the User Code function, operators must input their user
codes before the machine can operate.
The machine can keep count of the number of copies made under each user code.
1. User Code Mgmt. Specify whether to employ user codes to restrict copier us-
ers and manage the number of copies made.
Note
❒
Default:
Off
Menu Description
To Next Page
Loading...
Need help?
General
