Copying
28
2
the size not to be detected proper-
ly.
1: Sensor
Reference
Regarding originals that the docu-
ment feeder can handle, see
⇒
P.15
“Originals”
.
Setting a stack of originals in the
document feeder
A Adjust the guide to the original
size.
B Set the aligned originals face up
into the document feeder.
1: Limit mark
2: Document guide
Note
❒
Do not stack originals above the
limit mark.
❒
To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er.
When SADF mode is selected
A Set one original face up into the
document feeder. Then press the
{
Start
}
key.
The Auto Feed indicator is shown
on the display.
B When the machine instructs you
to set another original, set the
next page.
The second and subsequent origi-
nals can be fed automatically with-
out pressing the
{
Start
}
key.
Note
❒
You can adjust the time the ma-
chine waits before being ready
for the next original. See “04.
SADF Auto Reset” in
⇒
P.123
“3. Input/Output
1
/
2
”
.
Setting Non-standard Sized
Originals in the Document
Feeder
Limitation
❒
Enter the size of your original if it
is not one of the following: A3
L
,
B4JIS
L
, A4
KL
, B5JIS
KL
,
To Next Page
Loading...
Need help?
General
