Remarks
134
5
Maintaining Your Machine
If the exposure glass, platen covers or
document feeder white sheet is dirty,
you might not be able to make copies
as you want. Clean them if you find
them dirty.
❖
Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒
Do not use chemical cleaner or or-
ganic solvent such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒
Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
service representative.
Cleaning the Exposure Glass
Cleaning the Platen Cover
Cleaning the Document
Feeder
ND1C0200
TRSR140E
To Next Page
Loading...
Need help?
General
