25
2. Copying
Basic Procedure
A When the machine is set for user
codes, enter the user code with
the Number keys and then press
the
{
#
}
key.
Reference
See
⇒
P.48
“User Codes”
.
B Make sure that the machine is in
Copy mode.
Note
❒
If not, press the
{
Copy
}
key.
C Make sure that there are no previ-
ous settings remaining.
Note
❒
To clear settings, press the
{
Clear Modes
}
key.
D Set your originals.
Reference
See
⇒
P.27
“Setting Originals”
.
E Set your desired settings.
F Enter the number of copies re-
quired with the Number keys.
Note
❒
The maximum copy quantity
can be set between 1 and 99 (de-
fault:
99
). See “05. Max. Copy
Q'ty” in
⇒
P.117
“1. General Fea-
tures
2
/
4
”
.
❒
To change the number entered,
press the
{
Clear/Stop
}
key and
enter the new number.
G Press the
{
Start
}
key.
The machine starts copying.
Note
❒
To stop the machine during the
multi-copy run, press the
{
Clear/
Stop
}
key.
❒
To return the machine to the in-
itial condition after copying,
press the
{
Clear Modes
}
key.
-
System Reset
The machine returns to its initial con-
dition automatically after your job is
finished, after a certain period of
time. This function is called “System
Reset”.
To Next Page
Loading...
Need help?
General
