129
5. Remarks
Do's and Don'ts
CAUTION:
Important
❒
Make sure the remaining memory space is 100%, before you unplug the pow-
er cord.
❒
While the machine is unplugged, you can neither send nor receive a fax.
Reference
For details, see the Facsimile Reference.
• Do not touch areas on or around the fusing unit. These areas get hot.
• After making copies continuously, you may feel the exposure glass is heated.
This is not a malfunction.
• You may feel warm around the ventilation hole. This is caused by exhaust air,
and is not a malfunction.
• Do not turn off the operation switch while copying or printing. When turning
off the operation switch, make sure that copying or printing is completed.
• The machine might fail to produce good copy images if condensation forms
inside the machine due to temperature change.
• Do not open the covers of the machine while copying or printing. If you do,
misfeeds might occur.
• Do not move the machine while copying or printing.
• If you operate the machine improperly or a failure occurs, your settings might
be lost. Be sure to take a note of your machine settings.
• Supplier shall not be liable for any loss or damages resulting from a failure on
the machine, loss of machine settings, and use of the machine.
•
When you move the machine, unplug the power cord from the
wall outlet to avoid fire or electric shock.
•
When the machine will not be used for a long time, unplug the
power cord.
To Next Page
Loading...
Need help?
General
