Playing the Sequencer
114114
Soloing a Track
(SOLO)
You can solo the playback of the selected track. You can also solo
during playback.
MEMO
The solo status of each track is saved in the scene.
1. In the PATTERN screen, touch <SOLO> to select.
The SOLO SELECT screen appears.
2. Touch the track that you want to solo.
The icons of all tracks other than the track you touch change
color, and the track plays solo.
You can also solo multiple tracks.
Soloed track
If you once again touch the icon of a track that’s being
soloed, solo is defeated.
If you’re soloing multiple tracks, solo is defeated
consecutively.
3. When you are nished making settings, press the
[EXIT] button to return to the PATTERN screen.
Even in the pattern screen, tracks that are not being played
can be clearly distinguished because of their changed
color, as when they are muted. Even if you switch a soloed
track between variations A–H, the track’s soloed status is
maintained.
Soloed track
Playing Group
1. Select a scene.
Select a scene in which a song is created.
Scenes in which a song is created have a “SONG” indication
as shown in the illustration.
2. Press the [GROUP] button.
The GROUP screen appears.
Current group
Group list
Play icon
Group name
¹
The left side of the screen is called the GROUP LIST area, and
shows the group names in numerical order.
¹
The currently selected group (current group) is indicated by
the cursor.
3. Press the [øPLAY] button.
The current group plays.
You can also play a group by touching its play icon in the
group list.
During playback, the GROUP PREVIEW screen is shown. Like
the PTN screen, the GROUP PREVIEW screen shows each
track’s current part at a glance.
4. To stop playback, press the [ðSTOP] button.
You can also stop by touching the GROUP PREVIEW screen.
5. To select a dierent group, directly touch its
group name to select it.
You can also use the [E2] knob to make a selection.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
