Roland FANTOM-06 Reference Manual

9595
The FANTOM lets you create samples by sampling the following
sounds.
¹
Keyboard performance
¹
Sound input from MIC/LINE INPUT L (MONO), R jacks (an
audio device or microphone)
¹
Sound input from the USB COMPUTER port
Preparing for Sampling
1. As necessary, connect the device that you want
to sample (an audio device or mic) to MIC/LINE
INPUT L (MONO), R jacks.
2. Press the [SAMPLING] button to make it light.
The SAMPLING MENU appears.
3. Touch <SAMPLING To Pad>.
The SAMPLING STANDBY screen appears.
MEMO
If there is already a pad sample in the pad to which you’re
sampling, the message “Sample Already Exists. Overwrite?” appears.
Press [E5] OK if you want to overwrite, or press [E6] CANCEL if you
want to cancel.
Level meter
Time counter
Rec status
Click ON/OFF
SAMPLE PAD display area
AUDIO IN ON/OFF
Menu Explanation
[E1] TRIG/IN
Selects which parameters are set by using
[E2]–[E4].
[E2]
[E1] = TRIG: AUTO TRIG
Turns AUTO TRIGGER on/o
[E1] = IN: MIC/LINE
Selects the input jack to use.
[E3]
[E1] = TRIG: AUTO TRIGGER LEVEL
Species the AUTO TRIGGER LEVEL
[E1] = IN: (None)
[E4]
[E1] = TRIG: TEMPO
Changes the click tempo
[E1] = IN: REC LEVEL
Set the sampling level.
[E5] CANCEL Cancels the sampling standby state.
[E6] START Starts sampling.
<Click> Turns the click tone on/o.
<Sampling Mode> Selects the sampling mode (input source).
<Format> Selects the sampling format.
4. Note that the bank and number of the sample pad
you’re sampling are shown in the SAMPLE PAD
display area.
In this example, the BANK 1-1 pad is selected.
5. If you want to change the bank and number of the
sample pad, touch <SAMPLE PAD>.
In the SAMPLING DESTINATION (PAD) screen, select the bank
and number of the pad to which you want to sample, and
then select [E6] SELECT.
MEMO
If there is already a pad sample in the pad to which you are
sampling, the message “Sample Already Exists. Overwrite?” appears.
Press [E5] OK if you want to overwrite, or press [E6] CANCEL if you
want to cancel.
6. Touch <Sampling Mode> and select the sampling
mode.
Parameter Explanation
KBD+INPUT
Samples the keyboard performance and
the audio input from MIC/LINE INPUT L
(MONO), R jacks and the USB COMPUTER
port.
KBD Samples the keyboard performance.
INPUT
Samples the audio input from MIC/LINE
INPUT jacks 1, 2 and the USB COMPUTER
port.
Sampling
(To Pad)

Roland FANTOM-06 Specifications

General

Bit rate	24 bit
Pitch wheel	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Chorus, Reverberation
Sound effects quantity	16
Chorus effects quantity	9
Keyboard number of keys	61
Preset programs quantity	10
Maximum polyphony (notes)	8
Reverberation effects quantity	7
6.35 mm (1⁄4-inch) input	1
Display type	LED
Power source type	AC

Weight and Dimensions

Depth	323 mm
Width	1006 mm
Height	95 mm
Weight	6000 g