Expansions and parameter assignment
10.4 Drive racks and storage media
SIMATIC IPC647C
90 Operating Instructions, 12/2010, A5E02669337-02
Removing an SSD with mounting plate
How to remove the SSD from the drive rack
1. On both sides of the drive rack,
loosen the two screws that secure
the mounting plate in the drive
rack.
2. Pull out the mounting plate with the
SSD from the drive rack in the
direction of the cable. Do not pull
on the cable.
3. Loosen the four screws that secure
the SSD to the mounting plate.
4. Remove the SSD from the
mounting plate.
5. Pull out the plug from the SSD.
Installing an SSD with mounting plate
Perform the tasks describe above in reverse order.
To Next Page
Loading...
Need help?
General
