Installation and EMC guidelines
1.2 Danger and warning information
SIMATIC TDC hardware
14 System Manual, 08/2017, A5E01114865-AL
Danger and warning information
During operation of electrical devices, certain parts of these devices are necessarily under
dangerous voltage.
Ignorance of the safety instructions may result in severe injury or property damage.
Particularly the warning notes in the corresponding Operating Instructions must be strictly
observed.
Electrostatic sensitive devices
The modules contain components that are sensitive to electrostatic charge. Always
discharge your body before you touch an electronic module. This can be done quite simply
by touching a conductive, grounded object immediately before you handle the component
(e.g. bright metal parts of the control cabinet, grounding contact of socket outlet.)
Lifting and carrying heavy loads
Note the regulations/notes on lifting and carrying heavy loads.
Use only a vacuum cleaner and dry cloths to clean the devices.
To Next Page
Loading...
Need help?
General
