Preface
SIMATIC TDC hardware
System Manual, 08/2017, A5E01114865-AL
5
As first-time user, you should use the manual as follows:
● Read the initial sections before using the software so that you become familiar with the
terminology and procedural principles.
● You can then go ahead and use the respective sections of the manual, for example, if you
intend to run a specific task (e.g. loading programs).
If you have already gained some experience while running a small project, you can read
individual sections of the manual in order to obtain information on specific topics.
The objective of the user part of this manual is to provide information on basic procedures,
but does not contain any detailed instructions with individual step sequences. For more
information on the software dialogs and their handling, refer to the Online Help.
The products can be recycled due to their low-pollutant content. Contact a certified
electronic-waste disposal company to recycle and dispose of your old equipment in an
environment-friendly manner.
● You can find information on the technical support offer in the appendix (Page 221) to this
documentation.
● You can find the offer for technical documentation for the individual SIMATIC products
and systems on the Internet (http://www.siemens.com/simatic-tech-doku-portal).
● You can find the online catalog and online ordering system on the Internet
(http://mall.automation.siemens.com).
To Next Page
Loading...
Need help?
General
