Siemens SINAMICS V90 User Manual

Basic operator panel (BOP)
6.2 Parameter structure
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2019, A5E36037884-007
193
6.2
Parameter structure
The overall parameter structure of the BOP is designed as follows.
Note
There is no ABS menu function for a servo motor with an incremental encoder.
The ABS
menu function is
only
available for a servo motor with an absolute encoder.

Siemens SINAMICS V90 Specifications

General

Power Range	0.05 kW to 7.0 kW
Protection Class	IP20
Communication	USS/Modbus RTU
Feedback	Incremental encoder
Input Voltage	1AC 200 V to 240 V, 3AC 380 V to 480 V
Control Modes	Position, Speed, Torque
Operating Temperature	0 °C to +40°C
Storage Temperature	-40°C to +70°C
Relative Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000 m above sea level