Checking the Communications Status
Diagnosis
Chapter
24
Checking the
Communications Status
In the Diagnosis menu, you can check the LAN
communications status within the system.
Communications Status Display
Open the Diagnosis >System Info >LAN Status menu
(7431).
The following communications status screen appears.
Devices constituting the system only appear if they are
connected.
On the screen, devices that send information are listed
under “Device,” and those that receive information are
listed under “Target.”
The following information appears in the “Status” column.
•
Connected: Ready for communication from Device to
Target.
•
Not Connected: Not Ready for communication from
Device to Target.
To Next Page
Loading...
Need help?
General
