ELECTRICAL SYSTEM 9-33
TURN SIGNAL LIGHT
Turn signal light: 12 V 21 W 1

TURN SIGNAL LIGHT BULB REPLACEMENT
• Remove the lens by removing the screws.
• Push in on the bulb, turn it counter clockwise, and pull it out.

If you touch the bulb with your bare hands, clean the bulb with a cloth moistened with alcohol
or soapy water to prevent premature bulb failure.
* Do not use bulb other than those with predetermined wattage.
Do not overtighten the lens fitting screws.
To Next Page
Loading...
Need help?
General
