EasyManuals Logo
Home>Suzuki>Motorcycle>TU250X

Suzuki TU250X User Manual

Suzuki TU250X
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
PERIODIC MAINTENANCE 2-25
OIL PRESSURE CHECK
Check the oil pressure periodically. This will give a good indication of the condition of the moving parts.
Oil pressure:
Low or high oil pressure can indicate any of the following conditions:
LOW OIL PRESSURE
* Clogged oil filter
* Oil leakage from the oil passage
* Damaged O-ring
* Defective oil pump
* Combination of the above items
HIGH OIL PRESSURE
* Engine oil viscosity is too high
* Clogged oil passage
* Combination of the above items
OIL PRESSURE TEST PROCEDURE
Connect the multi circuit tester or engine tachometer to the
high-tension cord. (2-8)
Remove the oil gallery plug 1.
Install the oil pressure gauge and adaptor into the main oil
gallery.
Warm up the engine as follows:
Summer: 10 minutes at 2 000 r/min
Winter: 20 minutes at 2 000 r/min
After warming up the engine, increase the engine speed to
3 000 r/min (observe the tachometer), and read the oil pres-
sure gauge.
Oil gallery plug: 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
09900-25008: Multi circuit tester set
09900-26006: Engine tachometer
09915-74511: Oil pressure gauge (600 kPa)
Above 30 kPa (0.3 kgf/cm², 4.3 psi)
at 3 000 r/min, oil temp. at 60 °C (140 °F)
Below 70 kPa (0.7 kgf/cm², 10.0 psi)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzuki TU250X and is the answer not in the manual?

Suzuki TU250X Specifications

General IconGeneral
BrandSuzuki
ModelTU250X
CategoryMotorcycle
LanguageEnglish

Related product manuals