3-26 ENGINE
REASSEMBLY
Reassemble the cylinder head cover in the reverse order of dis-
assembly. Pay attention to the following points:
• Apply engine oil to the rocker arms, rocker arm shafts and
O-rings.
• When inserting the rocker arm shaft, align the shaft hole A
with the bolt hole B.
CYLINDER HEAD
DISASSEMBLY
• Remove the cam chain tensioner 1.
• Remove the intake pipe 2.
• Compress the valve spring with the special tools.
09916-14510: Valve lifter
09916-14910: Valve lifter attachment
Use the new O-rings to prevent oil leakage.
Compressing of the valve spring must be limited to the
extent only necessary to prevent the spring from
fatigue.
To Next Page
Loading...
Need help?
General
