11-6 EMISSION CONTROL INFORMATION
PAIR (AIR SUPPLY) SYSTEM AND EMISSION CONTROL SYSTEM
INSPECTION
PAIR HOSES
• Inspect the PAIR hoses and PAIR pipe for wear or damage.
• Inspect the PAIR hoses and PAIR pipe for secure connection.
PAIR REED VALVE
REMOVAL
• Remove the PAIR control solenoid valve. (11-7)
• Remove the PAIR reed valve cover 1 and PAIR reed valve
2.
INSPECTION
• Inspect the reed valve for the carbon deposit.
• If the carbon deposit is found in the reed valve, replace the
PAIR reed valve with a new one.
INSTALLATION
• Install the PAIR reed valve 1 and PAIR reed valve cover 2.
• Apply thread lock to the screws and tighten them securely.
99000-32110: THREAD LOCK SUPER “1322”
or equivalent
• Install the PAIR control solenoid valve.
To Next Page
Loading...
Need help?
General
