Tektronix MSO5204B Printable Help

Change the bus position
From the Bus Setup window, select the Bus number <B1-B16> or name to position on the display from the Bus list.
To use
To change the vertical position of the bus on the display, click the Bus Position entry box and use the keypad or the multipurpose
knob to enter a new position.
Behavior
The instrument moves the bus on the screen to the new position.
What do you want to do next?
Learn more about bus setups.
Learn about bus configuration.
Learn about digital setups.
Set up an I
2
C serial bus
NOTE. I
2
C serial bus setup is available only on instruments with the SR-EMBD option.
From the Bus Setup window, select Serial from the Bus Type list and then select the I2C Serial bus type.
NOTE. The Components for the I
2
C bus standard are set by the instrument.
For information on the controls, click the buttons.
■
Bus List
■
Display & Clear
■
Label
■
Position
■
Serial Input
■
Serial Threshold
Bus setups
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 113

Tektronix MSO5204B Specifications

General

Brand	Tektronix
Model	MSO5204B
Category	Test Equipment
Language	English