Tektronix MSO5204B Printable Help

Mask autoset horizontal controls
From the Mask menu, highlight Mask Configure; then select Autoset. From the Mask Setup control window, click the Autoset
Config button.
Overview. Use these controls to choose whether to have autoset affect the horizontal scale or position.
To use. Click the Scale and Position controls to turn these horizontal control functions on or off.
Behavior. Turning on the Scale or Position horizontal control functions sets up these adjustments to align the signal within the
mask when autoset is done.
What do you want to do next?
Learn about vertical autoset.
Learn about trigger level autoset.
Learn about autofit for autoset.
Select the mask autoset mode
From the Mask menu, highlight Mask Configure; then select Autoset. From the Mask Testing control window, click the Autoset
Config button.
Overview. Use these controls to select whether autoset will be done automatically or manually.
To use.
■
Click Auto to have autoset done automatically after a standard mask is selected.
■
Click Manual to make adjustments manually.
Oscilloscope reference
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 783

Tektronix MSO5204B Specifications

General

Brand	Tektronix
Model	MSO5204B
Category	Test Equipment
Language	English