Tektronix MSO5204B Printable Help

Set up a PCIe serial bus
NOTE. PCIe serial bus setup is available only on instruments with the SR-PCIE option.
From the Bus Setup window, select Serial from the Bus Type list and then select the PCIe Serial bus type.
For information on the controls, click the buttons.
■
Bus List
■
Display & Clear
■
Label
■
Position
■
Serial Input
■
Framing
■
Data Rate
■
Serial Threshold
To use
■
To change the input for a component, click the Input and select a channel from the cascading lists.
■
To set the serial bus type, click the Serial Bus Type entry box and select from the drop-down list.
■
To change the voltage threshold level, click the Threshold entry box and use the keypad to enter a value or use the
multipurpose knobs to select a voltage level.
■
To change the voltage hysteresis level, click the Hysteresis entry box and use the keypad to enter a value or use the
multipurpose knobs to select a voltage level.
■
To set the data rate, click the Data Rate entry box and select from the drop-down list.
Behavior
The instrument changes the components and voltage threshold levels, and uses those to decode the selected bus.
What do you want to do next?
Learn more about bus setups.
Learn about bus configuration.
Learn about digital setups.
Bus setups
126 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Tektronix MSO5204B Specifications

General

Brand	Tektronix
Model	MSO5204B
Category	Test Equipment
Language	English