Tektronix MSO5204B Printable Help

To use
■
To change the input for a component, click the Input and select a channel from the cascading lists.
■
To set the signal type, click the Signal Type entry box and select from the drop-down list.
■
To change a voltage threshold level, click the Threshold entry box and use the keypad to enter a value or use the
multipurpose knobs to select a voltage level.
■
To set the channel type, click the Channel Type entry box and select from the drop-down list.
■
To set the bit rate, click the Bit Rate entry box and select from the drop-down list.
Behavior
The instrument changes the components and voltage threshold levels, and uses those to decode the selected bus.
What do you want to do next?
Learn more about bus setups.
Learn about bus configuration.
Learn about digital setups.
Learn how to set up an I2C serial bus.
Learn how to set up an SPI serial bus.
Learn how to set up a USB serial bus.
Learn how to set up an RS-232 serial bus.
Learn how to set up a MIPI DSI1 Serial Bus
Learn how to set up a MIPI CSI2 Serial Bus
Learn how to set up an 8B10B Serial Bus
Learn how to set up a CAN Bus
Learn how to set up a LIN Serial Bus
Learn how to set up a FLEXRAY Serial Bus
Learn how to set up a MIL-1553 Bus
Learn how to set up an Ethernet Bus
Learn how to set up a PCIe Serial Bus
Learn how to set up an Custom serial bus.
Learn how to troubleshoot a serial bus.
Learn how to track down serial bus anomalies.
Learn how to view analog characteristics of a digital waveform.
Learn how to trigger on a bus.
Bus setups
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 131

Tektronix MSO5204B Specifications

General

Brand	Tektronix
Model	MSO5204B
Category	Test Equipment
Language	English