TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
114
)
Note:
To use the DHCP server function of the device, you should configure all computers in the LAN as
"Obtain an IP Address automatically" mode. This function will take effect until the device
reboots.
5.8.2 DHCP Clients List
Choose menu “DHCP > DHCP Clients List”, and then you can view the information about the
clients attached to the Device in the screen as shown in Figure 5-41.
Figure 5-41 DHCP Clients List
¾ Client Name - The name of the DHCP client.
¾ MAC Address - The MAC address of the DHCP client.
¾ Assigned IP - The IP address that the device has allocated to the DHCP client.
¾ Lease Time - The time of the DHCP client leased.
You cannot change any of the values on this page.
To update this page and to show the current attached devices, click the Refresh button.
5.8.3 Address Reservation
Choose menu “DHCP > Address Reservation”, and then you can view or add a reserved address
for clients via the next screen (shown in Figure 5-42).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
