TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
42
Figure 4-15 LAN
¾ MAC Address- The physical address of the LAN ports, as seen from the LAN. The value can
get IP address from DHCP server, or choosing static IP to
r the IP address of your system in dotted-decimal notation (factory default:
determines the size of the network. Normally
¾ Gateway- The gateway should be in the same subnet as your IP address.
et, the IP Address pool in the DHCP
Save button.
Click the Save button to save your settings.
When you choose the Dynamic IP mode, the DHCP Server function will be disabled.
Wireless menu (shown in Figure 4-16): Wireless Settings, Wireless Security, Wireless MAC
not be changed.
¾ Type- Choosing dynamic IP to
configure IP address manually.
¾ IP Address- Ente
192.168.1.254).
¾ Subnet Mask- It is an address code that
255.255.255.0 is used as the subnet mask.
)
Note:
1. If you change the IP address, you must use the new IP address to login the system.
2. If you select the type of dynamic IP, the DHCP server in this device will not start up.
3. If the new IP address you set is not in the same subn
server will not take effect, until they are re-configured.
4. The device will reboot automatically after you click the
)
Note:
4.7 Wireless
The Wireless option improves functionality and performance for wireless network. It can help you
make the AP an ideal solution for your wireless network. There are eight submenus under the
To Next Page
Loading...
Need help?
General
Weight and Dimensions
