EasyManuals Logo

TP-Link TL-WA7510N User Manual

TP-Link TL-WA7510N
171 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
63
¾ Secondary DNS - (Optional) You can input the IP Address of another DNS server if your ISP
provides two DNS servers.
)
Note:
1. When the device is working on Dynamic IP mode, the DHCP Server function will be disabled.
2. To use the DHCP server function of the device, you should configure all computers in the LAN
as "
Obtain an IP Address automatically
" mode. This function will take effect until the device
reboots.
Click Save to save the changes.
4.8.2 DHCP Clients List
Selecting DHCP > DHCP Clients List will enable you to view the Client Name, MAC Address,
Assigned IP and Lease Time of each DHCP Client connected to the device (Figure 4-32).
Figure 4-32 DHCP Clients List
¾ Client Name - The name of the DHCP client.
¾ MAC Address - The MAC address of the DHCP client.
¾ Assigned IP - The IP address that the device has allocated to the DHCP client.
¾ Lease Time - The time of the DHCP client leased.
You cannot change any of the values on this page.
To update this page and to show the current connected devices, click on the Refresh button.
4.8.3 Address Reservation
Selecting DHCP > Address Reservation will enable you to specify a reserved IP address for a
PC on the LAN, so the PC will always obtain the same IP address each time when it accesses the
AP. Reserved IP addresses should be assigned to servers that require permanent IP settings. The
screen below is used for address reservation (shown in Figure 4-33).

Table of Contents

Other manuals for TP-Link TL-WA7510N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WA7510N and is the answer not in the manual?

TP-Link TL-WA7510N Specifications

General IconGeneral
Frequency band5.745 - 5.825 GHz
Cabling technology10/100BASE-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11n
Receiver sensitivity802.11a 54M: -77dBm 48M: -79dBm 36M: -83dBm 24M: -86dBm 18M:-91dBm 12M:-92dBm 9M:-93dBm 6M:-94dBm 802.11n 150M: -73dBm 121.5M: -76dBm 108M: -77dBm 81M: -81dBm 54M:-84dBm 40.5M:-88dBm 27M:-91dBm 13.5M:-93dBm
Ethernet LAN data rates10, 100 Mbit/s
Maximum data transfer rate150 Mbit/s
Networking featuresFast Ethernet
Wireless technology802.11a/n
Antenna gain level (max)15 dBi
InternalNo
CertificationCE, FCC, RoHS
LED indicatorsYes
Ethernet LAN (RJ-45) ports1
Security algorithms128-bit WEP, 152-bit WEP, SSID, TKIP, WPA, WPA-PSK, WPA2, WPA2-PSK
Storage temperature (T-T)5 - 95 °C
Operating temperature (T-T)-30 - 70 °C
Storage relative humidity (H-H)-40 - 70 %
Operating relative humidity (H-H)10 - 90 %
Compatible operating systemsWindows 2000, XP, Vista, 7 MAC NetWare UNIX Linux
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)250 x 85 x 60.5 mm

Related product manuals