TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
57
¾ To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all the Entries enabled.
Click the Disable All button to make all the Entries disabled.
Click the Delete All button to delete all the entries.
Click the Next button to go to the next page.
Click the Previous button to return to the previous page.
)
Note:
1. If you enable the function and select the Deny the stations not specified by any enabled
entries in the list to access for Filtering Rules, there will be not any enable entries in the list;
thus, no wireless stations can access the AP.
2. Only in Standard AP mode, the current operation mode is shown at the top. Besides, if
Multi-SSID, a sub mode of Standard AP, is selected, you can choose one of the 4 SSIDs from
the pull-down list.
4.7.4 Wireless Advanced
Selecting Wireless > Wireless Advanced will allow you to do some advanced settings for the
device in the following screen as shown in Figure 4-25. As the configuration for each operation
mode is almost the same, we take Access Point mode for example here.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
