TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
126
¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack
Filtering.
¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value
between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set
value, the Device will start up the blocking function immediately.
¾ Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping Packet From WAN Port.
The default setting is Disabled. If enabled, the ping packet from Internet cannot access the
Device.
¾ Forbid Ping Packet From LAN Port - Enable or Disable Forbid Ping Packet From LAN Port.
The default setting is Disabled. If enabled, the ping packet from LAN cannot access the
Device and defend against some viruses.
Click the Save button to save the settings.
Click the Blocked DoS Host List button to display the DoS host table by blocking.
5.10.3 Local Management
Choose menu “Security > Local Management”, and then you can configure the management
rule in the screen as shown in Figure 5-54. The management feature allows you to deny
computers in LAN from accessing the Device.
Figure 5-54 Local Management
By default, the radio button All the PCs on the LAN are allowed to access the Router's
Web-Based Utility is selected. If you want to allow PCs with specific MAC Addresses to access
the Setup page of the Device's Web-Based Utility locally, from inside the network, click the radio
button Only the PCs listed can browse the built-in web pages to perform Administrator
tasks, and then enter each MAC Address in a separate field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the MAC address listed can
To Next Page
Loading...
Need help?
General
Weight and Dimensions
