TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
69
Figure 4-38 Ping Watch Dog Utility
¾ Enable - Turn on/off Ping Watch Dog.
¾ IP Address - The IP address of the target host where the Ping Watch Dog Utility is sending
ping packets.
¾ Interval - Time internal between two ping packets which are sent out continuously.
¾ Delay - Time delay before first ping packet is sent out when the device is restarted.
¾ Fail Count – It is the upper limit of the ping packet the device can drop continuously. If this
value is overrun, the device will restart automatically.
Be sure to click the Save button to make your settings in operation.
4.9.4 Speed Test
Selecting System Tools > Speed Test helps to test the connection speed to and from any
reachable IP address on current network, especially when we are building wireless network
between devices which are far away from each other.
It should be used for the preliminary throughput estimation between two network devices.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
