CNT-SVN01C-EN 93
Chapter 16
Other literature
The below literature is available in electronic format through e-Library, a
community page located on the My Standard intranet site. Unless other-
wise stated, the literature is also available in hard copy format, which can
be ordered through your local Trane office.
• PID Control in Tracer Controllers Applications Guide,
CNT-APG002-EN. Describes how to set up proportional, integral, and
derivative control loops and provides examples.
• Rover Operation and Programming guide, EMTX-SVX01E-EN.
Describes how to install and use the Rover service software. Rover is
required to configure a Tracer MP581 and to create and edit Tracer
graphical programs. This document is available in electronic format
only.
• Tracer Graphical Programming Applications Guide,
CNT-APG001-EN. A tutorial for learning Tracer graphical
programming.
• Tracer MP580/581 Programmable Controller Programming guide,
CNT-SVP01C-EN. Describes how to assemble graphical programs,
how to configure the controller, and how to create bindings with other
Comm5 devices.
• Tracer MP580/581 Programmable Controllers product catalog,
CNT-PRC002-EN. Describes the features and specifications of the
controller.
To Next Page
Loading...
Need help?
General
